# Makefile.in generated by automake 1.10.1 from Makefile.am.
# doc/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



# $Id: Makefile.am,v 1.40 2008/09/08 13:39:17 karl Exp $
# Makefile.am for texinfo/doc.
# Run automake in .. to produce Makefile.in from this.
#
# This file is free software; as a special exception the author gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
VPATH = .././../doc
pkgdatadir = $(datadir)/texinfo
pkglibdir = $(libdir)/texinfo
pkgincludedir = $(includedir)/texinfo
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i786-pc-msdosdjgpp
host_triplet = i786-pc-msdosdjgpp
subdir = doc
DIST_COMMON = README $(info_TEXINFOS) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in $(srcdir)/stamp-1 $(srcdir)/stamp-vti \
	$(srcdir)/version-stnd.texi $(srcdir)/version.texi texinfo.tex
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/gnulib/m4/alloca.m4 \
	$(top_srcdir)/gnulib/m4/argz.m4 \
	$(top_srcdir)/gnulib/m4/codeset.m4 \
	$(top_srcdir)/gnulib/m4/eealloc.m4 \
	$(top_srcdir)/gnulib/m4/environ.m4 \
	$(top_srcdir)/gnulib/m4/error.m4 \
	$(top_srcdir)/gnulib/m4/exitfail.m4 \
	$(top_srcdir)/gnulib/m4/extensions.m4 \
	$(top_srcdir)/gnulib/m4/getopt.m4 \
	$(top_srcdir)/gnulib/m4/gettext.m4 \
	$(top_srcdir)/gnulib/m4/gettimeofday.m4 \
	$(top_srcdir)/gnulib/m4/glibc21.m4 \
	$(top_srcdir)/gnulib/m4/gnulib-common.m4 \
	$(top_srcdir)/gnulib/m4/gnulib-comp.m4 \
	$(top_srcdir)/gnulib/m4/iconv.m4 \
	$(top_srcdir)/gnulib/m4/include_next.m4 \
	$(top_srcdir)/gnulib/m4/inline.m4 \
	$(top_srcdir)/gnulib/m4/intlmacosx.m4 \
	$(top_srcdir)/gnulib/m4/lib-ld.m4 \
	$(top_srcdir)/gnulib/m4/lib-link.m4 \
	$(top_srcdir)/gnulib/m4/lib-prefix.m4 \
	$(top_srcdir)/gnulib/m4/localcharset.m4 \
	$(top_srcdir)/gnulib/m4/longlong.m4 \
	$(top_srcdir)/gnulib/m4/malloc.m4 \
	$(top_srcdir)/gnulib/m4/malloca.m4 \
	$(top_srcdir)/gnulib/m4/mbchar.m4 \
	$(top_srcdir)/gnulib/m4/mbiter.m4 \
	$(top_srcdir)/gnulib/m4/mbrtowc.m4 \
	$(top_srcdir)/gnulib/m4/mbscasecmp.m4 \
	$(top_srcdir)/gnulib/m4/mbschr.m4 \
	$(top_srcdir)/gnulib/m4/mbslen.m4 \
	$(top_srcdir)/gnulib/m4/mbsncasecmp.m4 \
	$(top_srcdir)/gnulib/m4/mbsstr.m4 \
	$(top_srcdir)/gnulib/m4/mbstate_t.m4 \
	$(top_srcdir)/gnulib/m4/mbswidth.m4 \
	$(top_srcdir)/gnulib/m4/memchr.m4 \
	$(top_srcdir)/gnulib/m4/memcmp.m4 \
	$(top_srcdir)/gnulib/m4/memcpy.m4 \
	$(top_srcdir)/gnulib/m4/memmem.m4 \
	$(top_srcdir)/gnulib/m4/memmove.m4 \
	$(top_srcdir)/gnulib/m4/mempcpy.m4 \
	$(top_srcdir)/gnulib/m4/mkstemp.m4 \
	$(top_srcdir)/gnulib/m4/nls.m4 \
	$(top_srcdir)/gnulib/m4/onceonly.m4 \
	$(top_srcdir)/gnulib/m4/po.m4 \
	$(top_srcdir)/gnulib/m4/progtest.m4 \
	$(top_srcdir)/gnulib/m4/setenv.m4 \
	$(top_srcdir)/gnulib/m4/stdbool.m4 \
	$(top_srcdir)/gnulib/m4/stdint.m4 \
	$(top_srcdir)/gnulib/m4/stdlib_h.m4 \
	$(top_srcdir)/gnulib/m4/stpcpy.m4 \
	$(top_srcdir)/gnulib/m4/strdup.m4 \
	$(top_srcdir)/gnulib/m4/strerror.m4 \
	$(top_srcdir)/gnulib/m4/string_h.m4 \
	$(top_srcdir)/gnulib/m4/strndup.m4 \
	$(top_srcdir)/gnulib/m4/strnlen.m4 \
	$(top_srcdir)/gnulib/m4/sys_stat_h.m4 \
	$(top_srcdir)/gnulib/m4/sys_time_h.m4 \
	$(top_srcdir)/gnulib/m4/tempname.m4 \
	$(top_srcdir)/gnulib/m4/unistd_h.m4 \
	$(top_srcdir)/gnulib/m4/wchar.m4 \
	$(top_srcdir)/gnulib/m4/wchar_t.m4 \
	$(top_srcdir)/gnulib/m4/wctype.m4 \
	$(top_srcdir)/gnulib/m4/wcwidth.m4 \
	$(top_srcdir)/gnulib/m4/wint_t.m4 \
	$(top_srcdir)/gnulib/m4/xalloc.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
INFO_DEPS = texinfo info-stnd.info info.info
TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex
am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux
DVIS = texinfo.dvi info-stnd.dvi info.dvi
PDFS = texinfo.pdf info-stnd.pdf info.pdf
PSS = texinfo.ps info-stnd.ps info.ps
HTMLS = texinfo.html info-stnd.html info.html
TEXINFOS = texinfo.txi info-stnd.texi info.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \
	"$(DESTDIR)$(man5dir)"
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
man1dir = $(mandir)/man1
man5dir = $(mandir)/man5
NROFF = nroff
MANS = $(man_MANS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} ${top_srcdir}/build-aux/missing --run aclocal-1.10
ALLOCA = 
ALLOCA_H = alloca.h
AMTAR = ${SHELL} ${top_srcdir}/build-aux/missing --run tar
ARGZ_H = argz.h
AUTOCONF = ${SHELL} ${top_srcdir}/build-aux/missing --run autoconf
AUTOHEADER = ${SHELL} ${top_srcdir}/build-aux/missing --run autoheader
AUTOMAKE = ${SHELL} ${top_srcdir}/build-aux/missing --run automake-1.10
AWK = gawk
BITSIZEOF_PTRDIFF_T = 
BITSIZEOF_SIG_ATOMIC_T = 
BITSIZEOF_SIZE_T = 
BITSIZEOF_WCHAR_T = 
BITSIZEOF_WINT_T = 
CC = gcc
CCDEPMODE = depmode=none
CFLAGS = -g -O2
CPP = gcc -E
CPPFLAGS = 
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = _deps
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /dev/env/DJDIR/bin/egrep
EXEEXT = .exe
GETOPT_H = getopt.h
GETTEXT_MACRO_VERSION = 0.17
GLIBC21 = no
GMSGFMT = /dev/env/DJDIR/bin/msgfmt
GMSGFMT_015 = :
GNULIB_CALLOC_POSIX = 0
GNULIB_CHOWN = 0
GNULIB_DUP2 = 0
GNULIB_ENVIRON = 1
GNULIB_FCHDIR = 0
GNULIB_FTRUNCATE = 0
GNULIB_GETCWD = 0
GNULIB_GETLOGIN_R = 0
GNULIB_GETPAGESIZE = 0
GNULIB_GETSUBOPT = 0
GNULIB_LCHOWN = 0
GNULIB_LSEEK = 0
GNULIB_MALLOC_POSIX = 1
GNULIB_MBSCASECMP = 1
GNULIB_MBSCASESTR = 0
GNULIB_MBSCHR = 1
GNULIB_MBSCSPN = 0
GNULIB_MBSLEN = 1
GNULIB_MBSNCASECMP = 1
GNULIB_MBSNLEN = 0
GNULIB_MBSPBRK = 0
GNULIB_MBSPCASECMP = 0
GNULIB_MBSRCHR = 0
GNULIB_MBSSEP = 0
GNULIB_MBSSPN = 0
GNULIB_MBSSTR = 1
GNULIB_MBSTOK_R = 0
GNULIB_MEMMEM = 1
GNULIB_MEMPCPY = 1
GNULIB_MEMRCHR = 0
GNULIB_MKDTEMP = 0
GNULIB_MKSTEMP = 1
GNULIB_PUTENV = 0
GNULIB_RAWMEMCHR = 0
GNULIB_READLINK = 0
GNULIB_REALLOC_POSIX = 0
GNULIB_RPMATCH = 0
GNULIB_SETENV = 1
GNULIB_SLEEP = 0
GNULIB_STPCPY = 1
GNULIB_STPNCPY = 0
GNULIB_STRCASESTR = 0
GNULIB_STRCHRNUL = 0
GNULIB_STRDUP = 1
GNULIB_STRERROR = 1
GNULIB_STRNDUP = 1
GNULIB_STRNLEN = 1
GNULIB_STRPBRK = 0
GNULIB_STRSEP = 0
GNULIB_STRSIGNAL = 0
GNULIB_STRSTR = 0
GNULIB_STRTOD = 0
GNULIB_STRTOK_R = 0
GNULIB_UNSETENV = 1
GNULIB_WCWIDTH = 1
GREP = /dev/env/DJDIR/bin/grep
HAVE_CALLOC_POSIX = 1
HAVE_DECL_ENVIRON = 0
HAVE_DECL_GETLOGIN_R = 1
HAVE_DECL_MEMMEM = 0
HAVE_DECL_MEMRCHR = 1
HAVE_DECL_STRDUP = 1
HAVE_DECL_STRERROR = 1
HAVE_DECL_STRNDUP = 1
HAVE_DECL_STRNLEN = 1
HAVE_DECL_STRSIGNAL = 1
HAVE_DECL_STRTOK_R = 1
HAVE_DECL_WCWIDTH = 0
HAVE_DUP2 = 1
HAVE_FTRUNCATE = 1
HAVE_GETPAGESIZE = 1
HAVE_GETSUBOPT = 1
HAVE_INTTYPES_H = 1
HAVE_ISWCNTRL = 0
HAVE_LONG_LONG_INT = 1
HAVE_LSTAT = 1
HAVE_MALLOC_POSIX = 1
HAVE_MEMPCPY = 0
HAVE_MKDTEMP = 1
HAVE_OS_H = 0
HAVE_RAWMEMCHR = 1
HAVE_READLINK = 1
HAVE_REALLOC_POSIX = 1
HAVE_RPMATCH = 1
HAVE_SETENV = 1
HAVE_SIGNED_SIG_ATOMIC_T = 
HAVE_SIGNED_WCHAR_T = 
HAVE_SIGNED_WINT_T = 
HAVE_SLEEP = 1
HAVE_STDINT_H = 1
HAVE_STPCPY = 1
HAVE_STPNCPY = 1
HAVE_STRCASESTR = 1
HAVE_STRCHRNUL = 1
HAVE_STRNDUP = 1
HAVE_STRPBRK = 1
HAVE_STRSEP = 1
HAVE_STRTOD = 1
HAVE_STRUCT_TIMEVAL = 1
HAVE_SYS_BITYPES_H = 
HAVE_SYS_INTTYPES_H = 
HAVE_SYS_PARAM_H = 0
HAVE_SYS_TIME_H = 1
HAVE_SYS_TYPES_H = 1
HAVE_UNISTD_H = 1
HAVE_UNSETENV = 1
HAVE_UNSIGNED_LONG_LONG_INT = 1
HAVE_WCHAR_H = 1
HAVE_WCTYPE_H = 1
HAVE_WINT_T = 1
HAVE__BOOL = 1
HELP2MAN = ${SHELL} ${top_srcdir}/build-aux/missing --run help2man
HEVEA = 
INCLUDE_NEXT = include_next
INSTALL = /dev/env/DJDIR/bin/ginstall -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
INTLLIBS = 
INTL_MACOSX_LIBS = 
LDFLAGS = 
LIBGNU_LIBDEPS = 
LIBGNU_LTLIBDEPS = 
LIBICONV = -liconv
LIBINTL = 
LIBOBJS = 
LIBS = 
LOCALCHARSET_TESTS_ENVIRONMENT = CHARSETALIASDIR="$(top_builddir)/gnulib/lib"
LTLIBICONV = -liconv
LTLIBINTL = 
LTLIBOBJS = 
MAINT = #

# Use the programs built in our distribution, taking account of possible
# cross-compiling.
MAKEINFO = $(top_builddir)/$(native_tools)/makeinfo/makeinfo
MKDIR_P = /dev/env/DJDIR/bin/mkdir -p
MSGFMT = /dev/env/DJDIR/bin/msgfmt
MSGFMT_015 = :
MSGMERGE = :
NEXT_STDINT_H = <stdint.h>
NEXT_STDLIB_H = <stdlib.h>
NEXT_STRING_H = <string.h>
NEXT_SYS_STAT_H = <sys/stat.h>
NEXT_SYS_TIME_H = <sys/time.h>
NEXT_UNISTD_H = <unistd.h>
NEXT_WCHAR_H = <wchar.h>
NEXT_WCTYPE_H = <wctype.h>
OBJEXT = o
PACKAGE = texinfo
PACKAGE_BUGREPORT = bug-texinfo@gnu.org
PACKAGE_NAME = GNU Texinfo
PACKAGE_STRING = GNU Texinfo 4.13
PACKAGE_TARNAME = texinfo
PACKAGE_VERSION = 4.13
PATH_SEPARATOR = :
POSUB = 
PTRDIFF_T_SUFFIX = 
RANLIB = ranlib
REPLACE_CHOWN = 0
REPLACE_FCHDIR = 0
REPLACE_GETCWD = 0
REPLACE_GETPAGESIZE = 0
REPLACE_GETTIMEOFDAY = 0
REPLACE_ISWCNTRL = 0
REPLACE_LCHOWN = 0
REPLACE_LSEEK = 0
REPLACE_MEMMEM = 0
REPLACE_MKDIR = 0
REPLACE_MKSTEMP = 0
REPLACE_PUTENV = 0
REPLACE_STRCASESTR = 0
REPLACE_STRERROR = 0
REPLACE_STRSIGNAL = 0
REPLACE_STRSTR = 0
REPLACE_STRTOD = 0
REPLACE_WCWIDTH = 1
SET_MAKE = 
SHELL = /bin/sh
SIG_ATOMIC_T_SUFFIX = 
SIZE_T_SUFFIX = 
STDBOOL_H = 
STDINT_H = 
STRIP = 
SYS_STAT_H = sys/stat.h
SYS_TIME_H = 
TERMLIBS = 
TEX = tex
USE_NLS = no
VERSION = 4.13
VOID_UNSETENV = 0
WCHAR_H = wchar.h
WCHAR_T_SUFFIX = 
WCTYPE_H = wctype.h
WINT_T_SUFFIX = 
XGETTEXT = /dev/env/DJDIR/bin/xgettext
XGETTEXT_015 = :
XGETTEXT_EXTRA_OPTIONS =  --flag=error:3:c-format --flag=error_at_line:5:c-format
abs_builddir = ../.././_build.205/doc
abs_srcdir = ../../../_build.205/./../doc
abs_top_builddir = ../../../_build.205
abs_top_srcdir = ../../../_build.205/./..
ac_ct_CC = 
am__include = include
am__leading_dot = _
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = i786-pc-msdosdjgpp
build_alias = 
build_cpu = i786
build_os = msdosdjgpp
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
gl_LIBOBJS =  argz.o error.o exitfail.o getopt.o getopt1.o memmem.o mempcpy.o tempname.o wcwidth.o xmalloc.o libsupp_towlower.o libsupp_towupper.o libsupp_mblen.o libsupp_mbrtowc.o libsupp_mbsinit.o libsupp_mbtowc.o
gl_LTLIBOBJS =  argz.lo error.lo exitfail.lo getopt.lo getopt1.lo memmem.lo mempcpy.lo tempname.lo wcwidth.lo xmalloc.lo libsupp_towlower.lo libsupp_towupper.lo libsupp_mblen.lo libsupp_mbrtowc.lo libsupp_mbsinit.lo libsupp_mbtowc.lo
gltests_LIBOBJS = 
gltests_LTLIBOBJS = 
host = i786-pc-msdosdjgpp
host_alias = 
host_cpu = i786
host_os = msdosdjgpp
host_vendor = pc
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = $(SHELL) ${top_srcdir}/build-aux/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /dev/env/DJDIR/bin/mkdir -p
native_tools = 
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /dev/env/DJDIR
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .././../doc
sysconfdir = ${prefix}/etc
target_alias = 
top_build_prefix = ../
top_builddir = ..
top_srcdir = .././..

# Put texinfo.txi first because that's the most important.
info_TEXINFOS = texinfo.txi info-stnd.texi info.texi
DISTCLEANFILES = texinfo texinfo-* info*.info*
man_MANS = info.1 infokey.1 install-info.1 makeinfo.1 texindex.1 \
	info.5 texinfo.5 texi2dvi.1 texi2pdf.1 pdftexi2dvi.1

# We'd also like to use something like this, but Automake calls
# "install-info" directly.
# INSTALL_INFO = $(top_builddir)/$(native_tools)/util/ginstall-info
TXI_XLATE = txi-cs.tex txi-de.tex txi-en.tex txi-es.tex txi-fr.tex \
	    txi-it.tex txi-nl.tex txi-nb.tex txi-pl.tex txi-pt.tex \
	    txi-ru.tex txi-sr.tex txi-tr.tex txi-uk.tex

refcard_files = refcard/Makefile refcard/txicmdcheck \
                refcard/txirefcard-a4.pdf refcard/txirefcard.pdf \
		refcard/txirefcard.tex


# Include our texinfo.tex, not Automake's.
EXTRA_DIST = epsf.tex texinfo.tex \
             fdl.texi \
	     $(man_MANS) $(TXI_XLATE)

texmf_texinfo = $(TEXMF)/tex/texinfo
texmf_dvips = $(TEXMF)/tex/generic/epsf

# The man pages depend on the --help strings and the version number.
common_mandeps = $(top_srcdir)/configure.ac

# Set up the variables:
man_rule_0 = \
	program=`expr '/$@' : '.*/\(.*\)\.1'` && \
	case $$program in makeinfo) dir=makeinfo;; info*) dir=info;; \
	        *install-info) dir=install-info;; *) dir=util;; esac && \
	dir="$(top_builddir)/$(native_tools)/$$dir" && \
	case $$program in info|install-info) program=g$$program;; \
		esac


# Update the manpage for a binary program; set up the variables,
# make sure the binary is up-to-date and then generate the man page.
man_rule_bin = echo "Updating man page $@" && \
	$(man_rule_0) && \
	echo cd "$$dir" '&&' $(MAKE) $(AM_MAKEFLAGS) $$program$(EXEEXT) && \
	    (cd "$$dir"  &&  $(MAKE) $(AM_MAKEFLAGS) $$program$(EXEEXT)) && \
	echo $(HELP2MAN) --name=\""$$name"\" "$$dir/$$program" -o '$@' && \
	     $(HELP2MAN) --name="$$name"     "$$dir/$$program" -o '$@'

util_srcdir = $(top_srcdir)/util

# Do not depend on the current user's settings.
# We need to include util_srcdir in PATH so texi2pdf can find texi2dvi.
change_envvars = unset TEXI2DVI_BUILD_MODE; unset TEXI2DVI_BUILD_DIRECTORY; \
  PATH="$(util_srcdir):$${PATH}"; export PATH

common_texi2dvi_deps = $(common_mandeps) \
                       $(util_srcdir)/texi2dvi $(util_srcdir)/texi2pdf

all: all-am

.SUFFIXES:
.SUFFIXES: .dvi .ps
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: # $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

texinfo: texinfo.txi $(srcdir)/version.texi
	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ `test -f 'texinfo.txi' || echo '$(srcdir)/'`texinfo.txi; \
	then \
	  rc=0; \
	else \
	  rc=$$?; \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

texinfo.dvi: texinfo.txi $(srcdir)/version.texi 
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) -o $@ `test -f 'texinfo.txi' || echo '$(srcdir)/'`texinfo.txi

texinfo.pdf: texinfo.txi $(srcdir)/version.texi 
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) -o $@ `test -f 'texinfo.txi' || echo '$(srcdir)/'`texinfo.txi

texinfo.html: texinfo.txi $(srcdir)/version.texi 
	rm -rf $(@:.html=.htp)
	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) `test -f 'texinfo.txi' || echo '$(srcdir)/'`texinfo.txi; \
	then \
	  rm -rf $@; \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
	else \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
	  exit 1; \
	fi
$(srcdir)/version.texi: # $(srcdir)/stamp-vti
$(srcdir)/stamp-vti: texinfo.txi $(top_srcdir)/configure
	@(dir=.; test -f ./texinfo.txi || dir=$(srcdir); \
	set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/texinfo.txi`; \
	echo "@set UPDATED $$1 $$2 $$3"; \
	echo "@set UPDATED-MONTH $$2 $$3"; \
	echo "@set EDITION $(VERSION)"; \
	echo "@set VERSION $(VERSION)") > vti.tmp
	@cmp -s vti.tmp $(srcdir)/version.texi \
	  || (echo "Updating $(srcdir)/version.texi"; \
	      cp vti.tmp $(srcdir)/version.texi)
	-@rm -f vti.tmp
	@cp $(srcdir)/version.texi $@

mostlyclean-vti:
	-rm -f vti.tmp

maintainer-clean-vti:
#	-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi

info-stnd.info: info-stnd.texi $(srcdir)/version-stnd.texi
	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ `test -f 'info-stnd.texi' || echo '$(srcdir)/'`info-stnd.texi; \
	then \
	  rc=0; \
	else \
	  rc=$$?; \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

info-stnd.dvi: info-stnd.texi $(srcdir)/version-stnd.texi 
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) -o $@ `test -f 'info-stnd.texi' || echo '$(srcdir)/'`info-stnd.texi

info-stnd.pdf: info-stnd.texi $(srcdir)/version-stnd.texi 
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) -o $@ `test -f 'info-stnd.texi' || echo '$(srcdir)/'`info-stnd.texi

info-stnd.html: info-stnd.texi $(srcdir)/version-stnd.texi 
	rm -rf $(@:.html=.htp)
	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) `test -f 'info-stnd.texi' || echo '$(srcdir)/'`info-stnd.texi; \
	then \
	  rm -rf $@; \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
	else \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
	  exit 1; \
	fi
$(srcdir)/version-stnd.texi: # $(srcdir)/stamp-1
$(srcdir)/stamp-1: info-stnd.texi $(top_srcdir)/configure
	@(dir=.; test -f ./info-stnd.texi || dir=$(srcdir); \
	set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/info-stnd.texi`; \
	echo "@set UPDATED $$1 $$2 $$3"; \
	echo "@set UPDATED-MONTH $$2 $$3"; \
	echo "@set EDITION $(VERSION)"; \
	echo "@set VERSION $(VERSION)") > 1.tmp
	@cmp -s 1.tmp $(srcdir)/version-stnd.texi \
	  || (echo "Updating $(srcdir)/version-stnd.texi"; \
	      cp 1.tmp $(srcdir)/version-stnd.texi)
	-@rm -f 1.tmp
	@cp $(srcdir)/version-stnd.texi $@

mostlyclean-1:
	-rm -f 1.tmp

maintainer-clean-1:
#	-rm -f $(srcdir)/stamp-1 $(srcdir)/version-stnd.texi

info.info: info.texi $(info_TEXINFOS)
	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ `test -f 'info.texi' || echo '$(srcdir)/'`info.texi; \
	then \
	  rc=0; \
	else \
	  rc=$$?; \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

info.dvi: info.texi $(info_TEXINFOS) 
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) -o $@ `test -f 'info.texi' || echo '$(srcdir)/'`info.texi

info.pdf: info.texi $(info_TEXINFOS) 
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) -o $@ `test -f 'info.texi' || echo '$(srcdir)/'`info.texi

info.html: info.texi $(info_TEXINFOS) 
	rm -rf $(@:.html=.htp)
	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) `test -f 'info.texi' || echo '$(srcdir)/'`info.texi; \
	then \
	  rm -rf $@; \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
	else \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
	  exit 1; \
	fi
.dvi.ps:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	$(DVIPS) -o $@ $<

uninstall-dvi-am:
	@$(NORMAL_UNINSTALL)
	@list='$(DVIS)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
	done

uninstall-html-am:
	@$(NORMAL_UNINSTALL)
	@list='$(HTMLS)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
	done

uninstall-info-am:
	@$(PRE_UNINSTALL)
	@if test -d '$(DESTDIR)$(infodir)' && \
	    (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS) texinf- texin- info-stn.i info.inf'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

uninstall-pdf-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PDFS)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
	done

uninstall-ps-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PSS)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
	done

mostlyclean-aminfo:
	-rm -rf texinfo.aux texinfo.cp texinfo.cps texinfo.fn texinfo.fns texinfo.ky \
	  texinfo.kys texinfo.log texinfo.op texinfo.pg texinfo.tmp \
	  texinfo.toc texinfo.tp texinfo.tps texinfo.vr texinfo.dvi \
	  texinfo.pdf texinfo.ps texinfo.html info-stnd.aux \
	  info-stnd.cp info-stnd.cps info-stnd.fn info-stnd.ky \
	  info-stnd.log info-stnd.pg info-stnd.pgs info-stnd.tmp \
	  info-stnd.toc info-stnd.tp info-stnd.tps info-stnd.vr \
	  info-stnd.dvi info-stnd.pdf info-stnd.ps info-stnd.html \
	  info.aux info.cp info.cps info.fn info.ky info.log info.pg \
	  info.pgs info.tmp info.toc info.tp info.tps info.vr info.dvi \
	  info.pdf info.ps info.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done
install-man1: $(man1_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
	done
uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
	  rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
	done
install-man5: $(man5_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man5dir)" || $(MKDIR_P) "$(DESTDIR)$(man5dir)"
	@list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.5*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    5*) ;; \
	    *) ext='5' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst"; \
	done
uninstall-man5:
	@$(NORMAL_UNINSTALL)
	@list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.5*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    5*) ;; \
	    *) ext='5' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f '$(DESTDIR)$(man5dir)/$$inst'"; \
	  rm -f "$(DESTDIR)$(man5dir)/$$inst"; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-info
check-am: all-am
check: check-am
all-am: Makefile $(INFO_DEPS) $(MANS)
installdirs:
	for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
#install-data-local:
clean: clean-am

clean-am: clean-generic mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am: $(DVIS)

html: html-am

html-am: $(HTMLS)

info: info-am

info-am: $(INFO_DEPS)

install-data-am: install-data-local install-info-am install-man

install-dvi: install-dvi-am

install-dvi-am: $(DVIS)
	@$(NORMAL_INSTALL)
	test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
	@list='$(DVIS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(dvidir)/$$f'"; \
	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(dvidir)/$$f"; \
	done
install-exec-am:

install-html: install-html-am

install-html-am: $(HTMLS)
	@$(NORMAL_INSTALL)
	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
	@list='$(HTMLS)'; for p in $$list; do \
	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  if test -d "$$d$$p"; then \
	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
	  else \
	    echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
	  fi; \
	done
install-info: install-info-am

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
                       $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
	      echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
	      $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man: install-man1 install-man5

install-pdf: install-pdf-am

install-pdf-am: $(PDFS)
	@$(NORMAL_INSTALL)
	test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
	@list='$(PDFS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
	done
install-ps: install-ps-am

install-ps-am: $(PSS)
	@$(NORMAL_INSTALL)
	test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
	@list='$(PSS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(psdir)/$$f'"; \
	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(psdir)/$$f"; \
	done
installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-1 \
	maintainer-clean-aminfo maintainer-clean-generic \
	maintainer-clean-vti

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-1 mostlyclean-aminfo mostlyclean-generic \
	mostlyclean-vti

pdf: pdf-am

pdf-am: $(PDFS)

ps: ps-am

ps-am: $(PSS)

uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
	uninstall-man uninstall-pdf-am uninstall-ps-am

uninstall-man: uninstall-man1 uninstall-man5

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic dist-info \
	distclean distclean-generic distdir dvi dvi-am html html-am \
	info info-am install install-am install-data install-data-am \
	install-data-local install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-man1 install-man5 \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-1 maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-vti mostlyclean \
	mostlyclean-1 mostlyclean-aminfo mostlyclean-generic \
	mostlyclean-vti pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-dvi-am uninstall-html-am uninstall-info-am \
	uninstall-man uninstall-man1 uninstall-man5 uninstall-pdf-am \
	uninstall-ps-am

	     $(refcard_files)

install-data-local:
	@echo
	@echo "WARNING: If your texmf tree does not already contain"
	@echo "         up-to-date versions, you must install"
	@echo "             texinfo.tex and txi-??.tex manually,"
	@echo "         perhaps in TEXMF/tex/texinfo/,"
	@echo "         where TEXMF is a root of your TeX tree."
	@echo "         See doc/README for some considerations."
	@echo "         You can run make TEXMF=/your/texmf install-tex to do this."
	@echo
	@echo "         You may also need to install epsf.tex in"
	@echo "         TEXMF/tex/generic/dvips, if your TeX"
	@echo "         installation did not include it."
install-tex:
	test -n "$(TEXMF)" || (echo "TEXMF must be set." >&2; exit 1)
	$(mkinstalldirs) $(DESTDIR)$(texmf_texinfo) $(DESTDIR)$(texmf_dvips)
	$(INSTALL_DATA) $(srcdir)/texinfo.tex $(DESTDIR)$(texmf_texinfo)/texinfo.tex
	$(INSTALL_DATA) $(srcdir)/epsf.tex $(DESTDIR)$(texmf_dvips)/epsf.tex
	for f in $(TXI_XLATE); do \
	  $(INSTALL_DATA) $(srcdir)/$$f $(DESTDIR)$(texmf_texinfo)/$$f; done

$(srcdir)/info.1: $(top_srcdir)/info/info.c $(common_mandeps)
	@name="read Info documents" && $(man_rule_bin)
$(srcdir)/infokey.1: $(top_srcdir)/info/infokey.c $(common_mandeps)
	@name="compile customizations for Info" && $(man_rule_bin)
$(srcdir)/install-info.1: $(top_srcdir)/install-info/install-info.c $(common_mandeps)
	@name="update info/dir entries" && $(man_rule_bin)

# Here we need some postprocessing:
$(srcdir)/makeinfo.1: $(top_srcdir)/makeinfo/makeinfo.c $(common_mandeps)
	@name="translate Texinfo documents" && $(man_rule_bin)
	mv $@ $@.tmp
	sed '/^\.IP$$/N;/\nAlso/s/I//;/\nThe/s/I//' $@.tmp >$@
	rm $@.tmp

$(srcdir)/texindex.1: $(util_srcdir)/texindex.c $(common_mandeps)
	@name="sort Texinfo index files" && $(man_rule_bin)

$(srcdir)/texi2dvi.1: $(common_texi2dvi_deps)
	$(change_envvars); $(HELP2MAN) --name="convert Texinfo documents to DVI" $(util_srcdir)/texi2dvi >$@

$(srcdir)/texi2pdf.1: $(common_texi2dvi_deps)
	$(change_envvars); $(HELP2MAN) --name="convert Texinfo documents to PDF" $(util_srcdir)/texi2pdf >$@

$(srcdir)/pdftexi2dvi.1:  $(common_texi2dvi_deps)
	$(change_envvars); $(HELP2MAN) --name="convert Texinfo documents to PDF" $(util_srcdir)/pdftexi2dvi >$@

# Do not create info files for distribution.
dist-info:
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
